USB GPS Finder 4G

  Frequently asked questions

  Technical Sheet PDF

Quick Start Guide

Please follow these simple steps:

1. Activate your device

• Choose a subscription duration
• Select a service plan (optional)
• Make payment

Activate now

2. Connect your device

• Plug the GPS tracker into your car’s cigarette lighter

3. Locate your device

• Download the Portal FINDER application

Google play store icon for downloading the paj finder portal app
apple-app-badge

or

• Access the FINDER Portal via your desktop browser

FAQ – USB GPS Finder 4G

Plug the FINDER into the 12V socket switches on immediately. Then LEDs light up.

Orange LED – GSM status Orange LED

SignalMeaning
The orange LED is blinkingThere is no available GSM signal
The orange LED is offThe GPS Tracker is in standby mode or switched off
The orange LED is fixedA GSM signal is available

Blue LED – GPS status Blue LED

Signal Meaning
The blue LED is blinkingThere is no available GPS signal
The blue LED is offThe GPS Tracker is in standby mode or switched off
The blue LED is fixedA GPS signal is available

Red LED – battery status Red LED

Signal Meaning
The red LED is off (when charging cable is plugged in)The GPS Tracker is fully charged
The red LED is fixed (when charging cable is plugged in)The GPS Tracker is charging
The delay in initiating route recording can vary depending on your vehicle. If the car does not supply power to the 12V GPS tracker when the ignition is off, the tracker will only start once the ignition is turned on. It can take up to one minute for the tracker to become operational. If you commence your journey within this timeframe, the initial segment of your route may not be recorded.

If the route recording is not working please try to restart your device. 

Make sure your FINDER is charged & switched on.To assist the connection, move the FINDER (short walk/drive) and restart if needed. If the FINDER still doesn’t connect, contact our support.

Ensure your device has a stable network connection & perform a power cycle by turning the device on and off.If it still doesn’t work please contact our support team .

Try using a different wall plug or charging cable, and ensure to turn on and off the device as part of the troubleshooting process

Support

Our in-house customer service team will be happy to assist you with any questions relating to your product.