POWER Finder 4G

Download User Manual PDF

Frequently asked questions

Technical Sheet PDF

QUICKSTART-GUIDE

Please follow these simple steps:

1. Charge your device

• Before first usage fully charge your device

2. Activate your built-in
SIM card

• Choose a subscription duration
• Select a service package (optional)
• Make payment

Activate now

3. Go outside for first usage

• Go outside and turn on the device
• Walk around for several minutes
• The device calibrates itself automatically

4. Locate your device

• Download the FINDER Portal App

Google play store icon for downloading the paj finder portal app

• Access the FINDER Portal through your desktop browser

FINDER Portal Instructions

FAQ – POWER Finder 4G

How can I power on and off the POWER Finder 4G device?

To turn the FINDER on, slide the switch to the right. The LEDs then flash for 5 seconds and slide the switch to the left. The FINDER then switches off.

What do the LED indicators on the POWER Finder 4G signify?

Orange LED – GSM status

Signal	Meaning
The orange LED is blinking	There is no available GSM signal
The orange LED is off	The GPS Tracker is in standby mode or switched off
The orange LED is fixed	A GSM signal is available

Blue LED – GPS status

Signal	Meaning
The blue LED is blinking	There is no available GPS signal
The blue LED is off	The GPS Tracker is in standby mode or switched off
The blue LED is fixed	A GPS signal is available

Red LED – battery status

Signal	Meaning
The red LED is off (when charging cable is plugged in)	The GPS Tracker is fully charged
The red LED is fixed (when charging cable is plugged in)	The GPS Tracker is charging

How can I operate the FINDER Portal ?

Please have a look at our

FINDER Portal Manual

Why isn't the route recording feature working?

If the route recording is not working please try to restart your device.

Why is my GPS tracker not connecting to the FINDER Portal?

Make sure your FINDER is charged & switched on.To assist the connection, move the FINDER (short walk/drive) and restart if needed. If the FINDER still doesn’t connect, contact our support.

Why aren't the alarms activating?

Ensure your device has a stable network connection & perform a power cycle by turning the device on and off.If it still doesn’t work please contact our support team .

Why won't the battery charge?

Try using a different wall plug or charging cable, and ensure to turn on and off the device as part of the troubleshooting process